NX Center line setting

 The customer default options for controlling most of the default settings for drafting objects are found by editing the drafting standard, and then saving the edits. Here's where the standard is located in the Customer Defaults dialog:

1. Choose File→Utilities→Customer Defaults.

2. In the Customer Defaults dialog box, select the Drafting→General/Setup node→Standard tab.

3. From the Drafting Standard list, select a standard.

4. Click Customize Standard.

Once you enter the drafting standard settings, you can find options for controlling the center mark under the Annotation-->Centerline node.

In order to save the changes, you'll need Write permission to the drafting standards file you're editing. Or you can save a custom version of the file. Just remember to use that custom standard when you set up your template.

Here's a link to more information about using and customizing drafting standard files:

--------------------------------------------------------------------------------------------

Setting your Drafting and PMI standard

NX provides a set of drafting standards default files that configure the appearance of specific annotation and drafting view objects in accordance with defined national or international drafting requirements. For example, the format size (height and length) and scale of annotation, the drawing units, and the orthographic projection angle settings are standards driven defaults. The drafting standards default files let you set, or reset, Drafting and PMI annotation and view preferences with minimal effort.

NX supports the following standards:

• ASME

• DIN

• ESKD

• GB

• ISO

• JIS

• Shipbuilding

You can use the installed standard, set a default standard for future NX sessions, or you can edit and save any standard to create your own custom standard.

You can also import and use custom standards that you created in a previous release, in the current release.

Where do I find it?

To set the standard for the current NX session:

Application	Drafting
Menu	Tools→Drafting Standard

To set the default standard or create a custom standard:

Command Finder	Customer Defaults
Menu	File→Utilities→Customer Defaults
Location in dialog box	Drafting→General/Setup→Standard tab